The Project Module 11x6

The technology used in our new The Project Module 11x6 was developed and patented in Europa. It consists mainly of conventional monocrystalline cells encapsulated in a fiberglass reinforced plastic core. This layer is located above and below the cell and is primarily responsible for the flexibility and stability of the modules. The material ensures that the PV modules are significantly lighter, thinner and more flexible than traditional PV panels, allowing them to fit the profile of roofs, even those with curved surfaces. The Project Module 11x6 is non-reflective, as it does not use any glass.

img-1

THE PROJECT MODULE 11x6 is a flexible photovoltaic module perfect for application on asphalt shingles roofs. Its light weight, only 3.3 kg/m2 allows for easy handling and, together with its bonding technology, significantly reduces installation time.

The Project Module 11x6

  • is easily attached using a special adhesive, which is tested and guaranteed for secure and long-lasting adhesion on various types of surfaces
  • is equipped with 66 monocrystalline silicon cells and has an output of 330 Wp
  • Its dimensions are 1020 x 1917 mm
img-2

Advantages

ULTRA-LIGHTWEIGHT
Only 3,3 kg/m2

HIGH-EFFICIENCY SILICON CELL
Monocrystalline

UNIQUE “LOW DEGRADATION” WARRANTY
Minimum 85 % yield after 40 years

PATENTED MULTI-LAYER CELL ENCAPSULATION
Maximal microcrack protection. Increased longevity

ETFE FRONT SHEET
Soil-repellent (high self-cleaning effect). UV & salt resistant. Optimal heat dissipation

HIGH YIELD IN ANY POSITION
Multi-directional lens structure

BENDABLE
Smallest bending diameter (2 m)

EASY TO INSTALL
Simple but strong adhesive bonding. No metal subsystem required. No ballast required

EXTREME WEATHER CONDITIONS
Even in heat, sandstorms and dusty conditions, the module provides stable and durable performance
Power 330WP
Solar cells Celle solari microcristalline 5DB
Solar cells quantity 11x6 = 66
Maximum system voltage 1000 V
Maximum overcurrent protection rating 20 A
Voc 45,39
Vmp 37,6
Isc 9,20 A
Imp 8,86 A
Weight 3,33 Kg/m2
Front sheet Soil-repellent ETFE
Encapsulation Patented fiberglass-reinforced plastic
Back sheet High-resistance PET
Junction box TÜV-Certified (ip67/68) with bypass diodes
Cables 2x4 mm2
Connector PV-45
Operating temperature range -40C° + 85C°
Temperature coefficient PMPP -0,38%/°C
Temperature coefficient VOC -0,36%/°C
Temperature coefficient ISC -0,07%/°C
The-Project-Module-11x6-1
The-Project-Module-11x6-2
The-Project-Module-11x6-3
The-Project-Module-11x6-4
The-Project-Module-11x6-5
The-Project-Module-11x6-6
The-Project-Module-11x6-7
The-Project-Module-11x6-8
The-Project-Module-11x6-9